Removal - NEC Express5800 Series User Manual
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
4.
Mount the support bracket for EXPRESSBUILDER Assembly Kit.
Align the positioning key with the groove, and secure it with two screws. (Two types of screws are provided. Use
the flat head screw for EXPRESSBUILDER Assembly Kit side, and the pan head screw for center side of
chassis.)
5.
Install the CPU blade having been removed to the Blade Enclosure according to the User's Guide of the Blade
Enclosure.
6.
Turn on the power of the CPU blade. Make sure that no error message appears in POST.
If any error messages are displayed, refer to Chapter 3 (1. POST Error Message) in "Maintenance Guide".
1.11.2 Removal
To remove the EXPRESSBUILDER Assembly Kit, remove the top cover according to Chapter 2 (1.4.1
Removal of top cover), and then perform steps 2 and 3 of Chapter 2 (1.11.1 Installation) in reverse order.
74
Express5800/B120d, B110d User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
