Removal - NEC Express5800 Series User Manual
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
1.6.3 Removal
To remove DIMMs, perform steps in Chapter 2 (1.6.2 Installation) in reverse order.
After DIMMs were removed, make sure that no error message appears in POST.
If any error messages are displayed, refer to Chapter 3 (1. POST Error Message) in "Maintenance Guide".
Run SETUP and select Yes after selecting Advanced
the CPU blade to clear the error information of the removed DIMM (refer to Chapter 2 (1. Details of System
BIOS) in "Maintenance Guide".).
Set the paging file size to a value larger than the recommended value (installed memory * 1.5) (for Windows).
Refer to the Installation Guide for more information.
Note
Important
54
To remove the defected DIMM, check the error message appearing in POST or NEC
ESMPRO to confirm the CPU blade on which the detected DIMM is installed.
Be sure to install dummy memory. If not, the CPU blade may fail to work properly.
Express5800/B120d, B110d User's Guide
1. Installing Internal Optional Devices
Memory Configuration
Memory Retest. Restart
Advertisement
Table of Contents
