NEC Express5800 Series User Manual page 103

Chapter 3 Setup
(4)
Advanced Chipset Configuration submenu
From the Advanced menu, select Advanced Chipset Configuration and then press the <Enter> key to
display the menu screen as shown below.
For details about the options, see the table below.
Option
Current QPI Link Freq
QPI Frequency Limit
HPET
Periodic SMI
VT-d
I/OAT
Wake On LAN/PME
Wake On Ring
Parameter
Number Displays the current QPI link speed (display only).
This option is displayed only in multiple processor
configuration.
[Auto]
Specify the upper limit of QPI link speed.
6.4 GT/s
7.2 GT/s
8.0 GT/s
Disabled Enable or disable the multimedia timer.
[Enabled]
Disabled
Enable or disable periodic SMI interrupt.
[Enabled]
Disabled Enable or disable Intel
Directed I/O, which is provided by the Intel chipset. This
[Enabled]
setting is displayed only when a processor that supports
this feature is installed.
Disabled
Enable or disable Intel I/O Acceleration Technology.
[Enabled]
Disabled
Enable or disable the feature that remotely powers on
[Enabled]
through a network.
[Disabled] Enable or disable the feature that remotely powers on
via serial ports (modems).
Enabled
Express5800/B120d, B110d User's Guide
2. Details of System BIOS
Descriptions
®
Virtualization Technology for
103