Sony ZRD-1 Installation Manual page 106

The Unit Layout screen is displayed.
[Unit Layout Preview]
Displays only the part of the entire array that is displayed in [Unit Layout].
2. In [Controller List], select the display controller to be set.
3. Select the connection pattern. (Default: the leftmost connection pattern (
, , , : Sets the display unit layout using the connection pattern. For details on the pat-
tern, refer to "Connection pattern" described later in this section. After clicking
one of the patterns, proceed to step 4.
: Sets the display unit layout manually. After clicking
4. Set the display unit layout and picture allocation number to [Unit Layout].
(1) Place the cursor over the empty block in [Unit Layout]. At this point, do not click. The 6 (rows)
x 12 (columns) blocks are displayed on [Unit Layout] positioning the cursor as the starting point.
The starting point changes to the lower left or the upper left according to the connection pattern.
Example) In the case of using the connection pattern
6-10 (E)
Starting point
))
, proceed to step 5.
Blocks of 6 12
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200