Sony ZRD-1 Installation Manual page 49

6. Align the display unit in the Y direction.
(1) Switch the monitor screen of the unit alignment tool to the Y direction adjusting screen. ([X, Y]
button)
(2) Insert the two eccentric pins (long) into the Y adjusting holes. Insert the hexagon wrench into the
eccentric pins (long).
. Insert the eccentric pins (long) vertically all the way to the end.
. If you have difficulty in inserting the eccentric pins (long) into the Y adjusting holes, slightly
rotate the eccentric pins (long) to find the position into which they can be inserted.
t
The eccentric pins (long) are supplied with the unit alignment tool.
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
Y direction
Eccentric pin (long)
Y adjusting hole
Hexagon wrench
2-15 (E)