Sony ZRD-1 Installation Manual page 149

3. Click [External Sync Signal] in [Sync Signal Selection].
4. Adjust the light delay time (0 to +4000) of the display unit in accordance with a sync signal in [Unit
Light Delay] as required.
The video can be delayed up to 1 frame. You can set the value up to 4000, but the video does not vary
more than the following value.
. 96 Hz: Approximately 3312
. 100 Hz: Approximately 3179
. 120 Hz: Approximately 2649
Change the setting using the sliding lever and
changes.
[Default]: 0
5. Click [Close].
The System Settings screen is closed.
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
. When you move the sliding lever, the value also
6-53 (E)