Toro FM 330 Operator's Manual page 2

This product complies with all relevant European
directives; for details, please see the separate
product-specific Declaration of Conformity (DOC)
sheet.
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical
or chemicals known to the State of
California to cause cancer, birth defects,
or reproductive harm.
Diesel engine exhaust and some of its
constituents are known to the State of
California to cause cancer, birth defects,
and other reproductive harm.
Use of this product may cause exposure
to chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
It is a violation of California Public Resource Code
Section 4442 or 4443 to use or operate the engine on
any forest-covered, brush-covered, or grass-covered
land unless the engine is equipped with a spark
arrester, as defined in Section 4442, maintained in
effective working order or the engine is constructed,
equipped, and maintained for the prevention of fire.
The enclosed Engine Owner's Manual is
supplied for information regarding the US
Environmental Protection Agency (EPA) and
the California Emission Control Regulation of
emission systems, maintenance, and warranty.
Replacements may be ordered through the engine
manufacturer.
Introduction
This machine is designed to mix drilling-fluid products
with clean water. You can mount the machine onto a
suitable transport vehicle and connect the machine
to a suitable horizontal directional drill. Read and
understand the directional drill Operator's Manual.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
You may contact Toro directly at www.Toro.com
product safety and operation training materials,
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
accessory information, help finding a dealer, or to
register your product.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
1. Model and serial-number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure 2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
1. Safety-alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
2
Figure 1
Figure 2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
g038405
g000502