Product Overview; Controls - Toro FM 330 Operator's Manual

Product Overview

Tank sold separately
1. Access hatch 4. Forklift pockets
2. Circulation 5. Suction hose
hose
3. Tank drain plug 6. Engine

Controls

Become familiar with all the controls before you start
the engine and operate the machine.
1. Circulation valve
2. Transfer valve
Figure 8
7. Hopper
8. Grate
Figure 9
3. Hopper valve
4. Suction valve
Circulation Valve
The circulation valve
the pump to the tank.
Suction Valve
The suction valve
the tank to the pump.
Hopper Valve
The hopper valve
hopper into the mixing system. The hopper valve is
most effective when it is just slightly open, as the fluid
then creates a vacuum effect and draws the bentonite
and other components into the flow.
Transfer Valve
g024034
The transfer valve
the mixing system to the drill.
Engine Controls
1. Dipstick
2. Oil-drain plug
g023834
8
(Figure 9) controls the flow from
(Figure 9) controls the flow from
(Figure 9) controls the flow from the
(Figure 9) controls the flow from
Figure 10
3. Decompression lever
4. Oil filter
g038406