Table of Contents
Advertisement
6.
Remove and discard the O-ring
7.
Pull the outlet fuel filter and gasket out of the
filler port
(Figure
8.
Install a new outlet fuel filter and gasket through
the filler port, and seat them in the fuel tank
(Figure
26).
9.
Install a new O-ring on the fuel shutoff lever, and
install the assembly to the fuel tank using the
nuts under the fuel shutoff lever
10.
Install the drain plug with a new gasket
25).
11.
Install the fuel cap and hand tighten it.
Note:
Overtightening the fuel cap will damage
it.
(Figure
26).
(Figure
Electrical System
26).
Maintenance
Replacing the Battery
1.
Remove the cover of the battery box.
2.
Disconnect the negative (black) ground cable
from the battery post.
26).
(Figure
WARNING
Incorrect battery cable routing could
damage the machine and cables, causing
sparks. Sparks can cause the battery
gases to explode, resulting in personal
injury.
• Always disconnect the negative
(black) battery cable before
disconnecting the positive (red)
cable.
• Always connect the positive (red)
battery cable before connecting the
negative (black) cable.
WARNING
Battery terminals or metal tools
could short against metal machine
components, causing sparks. Sparks
can cause the battery gases to explode,
resulting in personal injury.
• When removing or installing the
battery, do not allow the battery
terminals to touch any metal parts of
the machine.
• Do not allow metal tools to short
between the battery terminals and
metal parts of the machine.
3.
Remove the positive (red) battery cable.
4.
Remove the battery.
5.
Place the new battery in the tray.
6.
Install the positive (red) battery cable to the
positive (+) battery terminal, and tighten the nut
onto the bolt.
7.
Install the negative (black) ground cable to the
negative (-) battery terminal, and tighten the nut
onto the bolt.
8.
Install the cover of the battery box, and secure it
with the strap.
9.
Recycle the old battery at an authorized facility.
20
Advertisement
Table of Contents
