Recharge; Pc Connection - Philips VTR8210 User Manual

4.2 Recharge

1 The device has a built-in high-capacity battery, the factory
is equipped with a charger and data cable.
2 The device can be connected to a PC using the USB
cable. When recharging, the indicator remains green.
When the indicator goes out, the device is fully
recharged.
3 The device can be connected to the recharger using
the USB cable. When recharging, the indicator remains
green. When the indicator goes out, the device is fully
recharged.
4 Lithium battery is used for the remote control. Charging
the device with the equipped charger or connecting
the device to PC with a USB cable. During the charging
indicator is green, and it will go off if the device is fully
charged.
Note
Recharging may be conducted when the device is either
•
off or on. Under normal circumstances,the device will be
fully recharged within 4 hours when it is off, or about 6
hours when it is turned on.

4.3 PC Connection

The Video Tracer can be used as a USB mass storage to
conveniently store, back up and move files. The Video Tracer
can be linked to a computer with a USB cable. Please be
noted that VTR8210(DSJ-4J)must save, copy, move and delete
files via the FMS.as shown in the following picture.
Note
When moving files to or from the recorder, please do not
•
disconnect the device from the computer.
Please connect the device with PC with the USB cable
•
when the device is power on or long press the power
button for 3 seconds after connecting the device to PC.
If you need to format the TF card in the range of 16GB to
•
64 GB, the file system option must choose FAT32 to form
at. If the card capacity is 128GB, the file system option m
ust be selected for exFAT for formatting. NTFS format ca
n not be used or the machine will not be able to record.
EN
55