Philips VTR8210 User Manual page 77

Duration
5 Min
10 Min
15 Min
20 Min
18.4.13 Key Tone
This function creates a sound when any button is pressed
if the recording is stopped. Turn on/off key tone with this
function.
18.4.14 Indicator light
Turn on/off indicator according to needs.
18.4.15 Infrared Switch
On the System Settings menu, press the"
button to select the "Infrared" menu, and then press the
Menu button to enter the Infrared Switch menu. The menu
offers two options: Manual and Auto. After selecting the
mode, press the OK button to confirm, or press the Back
button to return to the previous menu.
Duration
18.4.16 Motion Detection
30 Min
In detection mode, the Video Tracer automatically starts
recording when any object enters the coverage of the body
worn camera. After the object gets out of the range of
coverage, it ends the recording and saves the recorded file.
Motion detection has four options: Off, Low, Medium and
High. It can be turned off or set to a desired level. When
the motion detection fuction is enabled, it is available during
video recording.
18.4.17 EV
As an exposure control mode, EV can adjust the brightness of
photos. You can adjust the brightness for unique visual effects.
EV can be set to any of 13 values within −2.0 to +2.0. Press
the"
value. Press the Play button to confirm after selection.
18.4.18 GPS
" or " "
Audio and video recorder built-in GPS module for providing
global positioning information through satellite signals, it can
be used only if the device's GPS function is enabled.
If you no longer need GPS, turn it off in the menu.
" button to select the desired exposure
" or "
EN
77