Philips VTR8210 User Manual page 75

18.4.2 TV Mode
TV Mode has two options: NTSC and PAL. When the device
is linked to TV, the correct option is selected based on the TV
mode.
18.4.3 Default Settings
This allows the user to reset the parameters of the device.
18.4.4 LCD Brightness
This allows the user to adjust the LCD to the required
brightness. The LCD brightness has three levels: High, Medium
and Low. Press the "
" or "
desired level. After selecting the level, press the OK button to
confirm, or press the Back button to return to the previous
menu.
18.4.5 VTR8210(DSJ-4J) System Time
VTR8210(DSJ-4J) needs configure system time via the files
management system.
18.4.6 Auto Off
If the user does not perform an operation on the device over
a pre-set time, the system automatically shuts down. See the
auto off setting interface reference below:
" button to select the
Auto off
Off
1 Min
2 Min
3 Min
18.4.7 LCD Auto Off
LCD Auto Off has 5 options: OFF, 1 Min, 2 Min, 3 Min and 5
Min. If no operations performed on the device by the user
during a set time period, the LCD automatically turns itself
off. If "OFF" is selected, the LCD will be remain on.
Auto off
5 Min
EN
75