Video Settings - Philips VTR8210 User Manual

18.1.3 Noise cut
An intelligent codec is used in device, the audio and video
recorder can realize dual Mic automatic noise reduction,
Noise cut has two options: Off and On. Press the "
" button to select.
After turning on automatic noise reduction, if you do not
press the " " key while recording or recording, the
saved file name of the video and audio file will contain "RNC"
letter, marking this file as noise reduction file. If you press the
" " key, the saved audio and video file name will contain
"IMP" letters, marking this file as an important markup file.

18.2 Video Settings

The Video Settings menu includes Resolution, Video Quality,
Pre-record, and Delay Record. Select the Video Settings menu
icon, press the " " or "
you wish to set, and then press the Play button to enter.
18.2.1 Resolution
Recording resolution has seven levels, i.e. 2304 × 1296 30P,
2560 × 1080 30P, 1920 × 1080 30P, 1280 × 720 60P, 1280
× 720 30P, 848 × 480 60P and 848 × 480 30P, to satisfy the
needs in most scenarios. Press the "
EN
72
" or "
" button to select the item
" or " " button
to select the desired resolution. After selection, press the Play
button to confirm, or press the Back button to return to the
previous menu.
The interface reference is presented in the following figure:
Resolution
2304x1296 30P
2506x1080 30P
1920x1080 30P
1280x720 30P
18.2.2 Video Quality
The Video Quality menu has three options: "S. Fine, Fine,
Normal." Different quality can be selected for different
needs. Higher quality will require a larger file within the same
recording period.
18.2.3 Pre-record
When Pre-record is enabled, you can record a video for
some seconds before an event. Pre-record has two options:
Off and On. Press the" " or "
selection, press the Play button to confirm, or press the Back
button to return to the previous menu.
Resolution
1280x720 30P
848x480 60P
848x480 30P
" button to select. After