Kenwood DV-2070 Instruction Manual page 18

"'§W;
18
Digital output jacks IOPTICAL)
Remove the protective cap before using a
digital output jack.
Remove cap
Note on connection of optica I-fiber cable
• Insert the optical-fiber cable straight into the connector until it clicks -
• Be sure to attacn the protection cap when the connector is not used.
• Never bend or bundle the optical-fiber cable
•All of the commercially-available optical fiber cables cannot be used with these units.
If there is an optical fiber cable which cannot be connected to your component, please consult
your dealer or nearest KENWOOD agent.
Optical-fiber cable
Copyright and copy protection notes
]
|
i
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laborato¬
ries
Confidential Unpublished Works, c 1992-1997 Dolby Laboratories.
All rights reserved.
It is prohibited bv laws to duplicate, broadcast, perform in public or
rent a disc without the permission of the copyright owners.
DTS" is a trademark of Digital Theater Systems. Inc
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other intellec¬
tual property rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended for home and
other limited viewing uses only unless otherwise authorized by
Macrovision Corporation Revers engineering or disassembly is pro¬
hibited.
This product is compatible with the MacroVision type copy protec¬
tion. Some discs contain the recording of copy inhibit signals, and the
video may be disturbed when the video of such discs is recorded onto
a VCR and played back.