Loading Batteries; Operation; Remote Control Mode Switch - Kenwood DV-2070 Instruction Manual

DV-2070 (En/K]
Loading batteries
ir- .s:H««arere.sre^aaB2irare3ftoa«^
' '. * •£
Operation
'i>:rara-<sarcaaK&
Insert the power plug into a power outlet, press the POWER
key of the main unit to ON, then press the desired remote
control key.
• When pressing more than one remote control keys successively, press
the keys securely py leaving an interval of 1 second or more between
pressing of keys.
1 The provided batteries are intended for use in operation checking, and
their service life may be short.
2 When the remote controllable distance becomes short, replace both
of the batteries with new ones.
3. If direct sunlight or the light of a high- frequency fluorescent lamp
(inverter type, etc.) is incident to the remote sensor, malfunction may
occur. In such a case, change the installation position to avoid
malfunction.
Remote control mode switch
Before starting remote control operation, be sure to set the
mode switch according to the play modes and keys to be
controlled.
The joystick allows you to select or enter an icon or item
displayed on the TV screen.
Basic operation
O Tilt the joystick to the direction of one of the arrows
(A. V, <3, t>> to select an icon displayed on the TV
screen.
© Press the ENTER key to enter the selection.
<iA