Playback; Playing A Disc From The Beginning - Kenwood DV-2070 Instruction Manual

The following procedure shows how to play a disc, such as a CD, VCD or DVD, from the beginning.
When playing a VCD with P.B.C. (Play-Back Control) capability, please read "Menu playback".
DV-2070
(En/Kj
Preparation
O
Turn on the TV and set the input source of the TV to
"Video".
© If the player is connected to a stereo system, etc., turn
on the associated components and set its input source
to "DVD".
Playing a disc from the beginning
Turn power ON.
Insert (Remove) the disc.
OSet the mode switch to DVD.
1 ©Open the tray.
— OVD
SET UP
own
or CD single (8 cm! or
DVD single (8 cm!
Label side up
©Insert (Remove) the disc.
©Close the tray.
^OPEN/CLOSE
,a«
With certain discs, playback starts now.
If a menu screen appears on the TV screen, select the
desired items as described in steps □ and S before
playing the disc.
• Place the disc to be played properly by aligning it with the groove on the
tray. (If the disc is not placed horizontally, malfunction will result )
• Do not touch the played side.
• Load only one disc.
• This unit cannot use a commercially available CD single (8 cm) disc
adapter
• The PANEL UP/DOWN key of the main unit allows to open or close
only the panel.
Start playback.
Display during disc play