ABB Relion RER615 Manual
  1. Manuals
  2. Brands
  3. ABB Manuals
  4. Industrial Equipment
  5. Relion RER615
  6. Manual

ABB Relion RER615 Manual

Hide thumbs Also See for Relion RER615:
Table of Contents

Advertisement

Quick Links

Download this manual
®
Relion
product family
Grid Automation
Recloser Protection and Control RER615
IEC 60870-5-101/104 Point List Manual

Advertisement

Table of Contents
loading

Related Manuals for ABB Relion RER615

Summary of Contents for ABB Relion RER615

  • Page 1 ® Relion product family Grid Automation Recloser Protection and Control RER615 IEC 60870-5-101/104 Point List Manual...
  • Page 3 Document ID: 1MRS757824 Issued: 2015-03-06 Revision: C Product version: 1.1 © Copyright 2015 ABB. All rights reserved...
  • Page 4 Copyright This document and parts thereof must not be reproduced or copied without written permission from ABB, and the contents thereof must not be imparted to a third party, nor used for any unauthorized purpose. The software or hardware described in this document is furnished under a license and may be used, copied, or disclosed only in accordance with the terms of such license.
  • Page 5 ABB is not liable for any such damages and/or losses.
  • Page 6 (EMC Directive 2004/108/EC) and concerning electrical equipment for use within specified voltage limits (Low-voltage directive 2006/95/EC). This conformity is the result of tests conducted by ABB in accordance with the product standards EN 50263 and EN 60255-26 for the EMC directive, and with the product standards EN 60255-1 and EN 60255-27 for the low voltage directive.

  • Page 7: Table Of Contents

    Table of contents Table of contents Section 1 Introduction...............5 This manual..................5 Intended audience................5 Product documentation...............6 Product documentation set............6 Document revision history.............6 Related documentation..............7 Symbols and conventions..............7 Symbols..................7 Document conventions..............7 Functions, codes and symbols............8 Section 2 IEC 60850-5-101/104 data mappings......13 Overview...................13 Supported functions in RER615............13 Indications..................15 Supported ASDU types...............15...
  • Page 8 Table of contents LD0.INTRPTEF1 Intermittent earth-fault protection (1)....20 LD0.EFPADM1 Admittance-based earth-fault protection (1)....................20 LD0.EFPADM2 Admittance-based earth-fault protection (2)....................21 LD0.EFPADM3 Admittance-based earth-fault protection (3)....................21 LD0.WPWDE1 Wattmetric-based earth-fault protection (1)..21 LD0.WPWDE2 Wattmetric-based earth-fault protection (2)..21 LD0.WPWDE3 Wattmetric-based earth-fault protection (3)..21 LD0.HAEFPTOC1 Harmonics-based earth-fault protection (1)....................22 LD0.NSPTOC1 Negative-sequence overcurrent protection (1)....................22...
  • Page 9 Table of contents LD0.VMHAI1 Voltage total demand distortion (1)......29 LD0.PHQVVR1 PQ - Voltage variation signals (1)......30 LD0.VSQVUB1 PQ - Voltage unbalance detection (1)....30 CTRL.DCSXSWI1 Disconnector position indication (1)....30 CTRL.DCSXSWI1 Disconnector position indication (2)....30 CTRL.ESSXSWI1 Earthing switch indication (1)......30 CTRL.ESSXSWI2 Earthing switch indication (2)......31 LD0.DARREC1 Autorecloser (1)..........31 LD0.SECRSYN1 Synchrocheck (1)..........31 LD0.SSCBR1 Circuit breaker condition monitoring (1)....32...
  • Page 10 Table of contents LD0.VSMSQI2 Sequence of voltage measurements (2).....43 LD0.PEMMXU1 Three-phase power measurements (1).....43 LD0.FMMXU1 Frequency measurement (1).......43 LD0.LEDGGIO1 LED states (1)...........44 LD0.FLTMSTA1 Fault record data (1).........44 Integrated totals................45 Supported ASDU types...............45 CTRL.CBCSWI1 Operation counter..........46 LD0.PEMMTR1 Three-phase energy values (1)......46 Controls....................46 Supported ASDU types...............46 General device data..............47...

  • Page 11: Section 1 Introduction

    Section 1 1MRS757824 C Introduction Section 1 Introduction This manual The point list manual describes the outlook and properties of the data points specific to the IED. The manual should be used in conjunction with the corresponding communication protocol manual. Intended audience This manual addresses the communication system engineer or system integrator responsible for pre-engineering and engineering for communication setup in a...

  • Page 12: Product Documentation

    Document revision history Document revision/date Product version History A/2013-09-17 First release B/2014-06-13 Content updated C/2015-03-06 Content updated to correspond to the product version Download the latest documents from the ABB Website http://www.abb.com/substationautomation. Recloser Protection and Control RER615 Point List Manual...

  • Page 13: Related Documentation

    Section 1 1MRS757824 C Introduction 1.3.3 Related documentation Name of the document Document ID IEC 60870-5-101/104 Communication Protocol Manual 1MRS757821 Symbols and conventions 1.4.1 Symbols The caution icon indicates important information or warning related to the concept discussed in the text. It might indicate the presence of a hazard which could result in corruption of software or damage to equipment or property.

  • Page 14: Functions, Codes And Symbols

    Section 1 1MRS757824 C Introduction 1.4.3 Functions, codes and symbols All available functions are listed in the table. All of them may not be applicable to all products. Table 1: Functions included in the relay Function IEC 61850 IEC 60617 IEC-ANSI Protection Three-phase non-directional...
  • Page 15 Section 1 1MRS757824 C Introduction Function IEC 61850 IEC 60617 IEC-ANSI Harmonics based earth-fault HAEFPTOC1 Io>HA (1) 51NHA (1) protection, instance 1 Negative-sequence overcurrent NSPTOC1 I2> (1) 46 (1) protection, instance 1 Negative-sequence overcurrent NSPTOC2 I2> (2) 46 (2) protection, instance 2 Phase discontinuity protection, PDNSPTOC1 I2/I1>...
  • Page 16 Section 1 1MRS757824 C Introduction Function IEC 61850 IEC 60617 IEC-ANSI Power quality Current total demand distortion, CMHAI1 PQM3I (1) PQM3I (1) instance 1 Voltage total harmonic distortion, VMHAI1 PQM3U (1) PQM3V (1) instance 1 Voltage variation, instance 1 PHQVVR1 PQMU (1) PQMV (1) Voltage unbalance, instance 1...
  • Page 17 Section 1 1MRS757824 C Introduction Function IEC 61850 IEC 60617 IEC-ANSI Frequency measurement, instance 1 FMMXU1 f (1) f (1) Load profile, instance 1 LDPMSTA1 LOADPROF (1) LOADPROF (1) Other Minimum pulse timer (2 pcs), TP (1) TP (1) instance 1 TPGAPC1 Minimum pulse timer (2 pcs), TP (2)

  • Page 19: Section 2 Iec 60850-5-101/104 Data Mappings

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings Section 2 IEC 60850-5-101/104 data mappings Overview This document describes the IEC 60870-5-101/IEC 60870-5-104 data points and structures available in the IED. The point lists describe a superset of all data available through the standard configuration/s. The tables show the default point definitions.
  • Page 20 Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings Function IEC 61850 RE01 RE02 Negative-sequence overvoltage protection NSPTOV Frequency protection FRPFRQ Three-phase thermal protection for feeders, cables and distribution transformers T1PTTR Circuit breaker failure protection CCBRBRF Three-phase inrush detector INRPHAR Master trip TRPPTRC Multi-purpose protection MAPGAPC...

  • Page 21: Indications

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings Function IEC 61850 RE01 RE02 Pulse timer (8 pcs) PTGAPC Time delay off (8 pcs) TOFGAPC Time delay on (8 pcs) TONGAPC Set reset (8 pcs) SRGAPC Move (8 pcs) MVGAPC Generic control point (16 pcs) SPCGGIO Remote generic control points SPCRGGIO...

  • Page 22: General Device Data

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.3.2 General device data Table 4: General device data Object type Addr IEC 61850 name SA name Description Values CTRL.LLN0 Loc.stVal Local state 1=Local LD0.LNN0 .SetSeld.stVal Settings reserved 1=Reserved .SetChg.stVal Settings changed 1=Changed DR.RDRE1 .RcdMade.stVal...

  • Page 23: Ld0.Phhptoc1 Phase Overcurrent Protection, High Stage (1)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.3.4 LD0.PHHPTOC1 Phase overcurrent protection, high stage Table 6: LD0.PHHPTOC1 Phase overcurrent protection, high stage (1) Object type Addr IEC 61850 name SA name Description Values LD0.PHHPTOC1 .Str.general START General start 1=Start .Str.phsA phase A start 1=Start...

  • Page 24: Ld0.Fdphlpdoc2 Fa - Directional Phase Overcurrent Protection, Low Stage (2)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings Object type Addr IEC 61850 name SA name Description Values .Op.general OPERATE General operate 1=Operate .Op.phsA phase A operate 1=Operate .Op.phsB phase B operate 1=Operate .Op.phsC phase C operate 1=Operate 2.3.7 LD0.FDPHLPDOC2 FA - Directional phase overcurrent protection, low stage (2) Table 9: LD0.FDPHLPDOC2 FA - Directional phase overcurrent protection, low stage (2)

  • Page 25: Ld0.Feflptoc1 Fa - Earth-Fault Protection, Low Stage (1)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.3.9 LD0.FEFLPTOC1 FA - Earth-fault protection, low stage (1) Table 11: LD0.FEFLPTOC1 FA - Earth-fault protection, low stage (1) Object type Addr IEC 61850 name SA name Description Values LD0.FEFLPTOC1 .Str.general START General start 1=Start .Op.general...

  • Page 26: Ld0.Fdeflpdef2 Fa - Directional Earth-Fault Protection, Low Stage (2)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.3.13 LD0.FDEFLPDEF2 FA - Directional earth-fault protection, low stage (2) Table 15: LD0.FDEFLPDEF2 FA - Directional earth-fault protection, low stage (2) Object type Addr IEC 61850 name SA name Description Values LD0.FDEFLPTOC2 .Str.general START General start...

  • Page 27: Ld0.Efpadm2 Admittance-Based Earth-Fault Protection (2)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.3.17 LD0.EFPADM2 Admittance-based earth-fault protection (2) Table 19: LD0.EFPADM2 Admittance-based earth-fault protection (2) Object type Addr IEC 61850 name SA name Description Values LD0.EFPADM2 .Str.general START General start 1=Start .Op.general OPERATE General operate 1=Operate 2.3.18 LD0.EFPADM3 Admittance-based earth-fault protection (3)

  • Page 28: Ld0.Haefptoc1 Harmonics-Based Earth-Fault Protection (1)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.3.22 LD0.HAEFPTOC1 Harmonics-based earth-fault protection Table 24: LD0.HAEFPTOC1 Harmonics-based earth-fault protection (1) Object type Addr IEC 61850 name SA name Description Values LD0.HAEFPTOC1 1337 .Str.general START General start 1=Start 1336 .Op.general OPERATE General operate 1=Operate 2.3.23...

  • Page 29: Ld0.Rovptov1 Residual Overvoltage Protection (1)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.3.26 LD0.ROVPTOV1 Residual overvoltage protection (1) Table 28: LD0.ROVPTOV1 Residual overvoltage protection (1) Object type Addr IEC 61850 name SA name Description Values LD0.ROVPTOV1 1086 .Str.general START General start 1=Start 1085 .Op.general OPERATE General operate 1=Operate...

  • Page 30: Ld0.Phptuv3 Phase Undervoltage Protection (3)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings Object type Addr IEC 61850 name SA name Description Values 1051 .Op.general OPERATE General operate 1=Operate 1052 .Op.phsA phase A operate 1=Operate 1053 .Op.phsB phase B operate 1=Operate 1054 .Op.phsC phase C operate 1=Operate 2.3.30 LD0.PHPTUV3 Phase undervoltage protection (3)

  • Page 31: Ld0.Phptov2 Phase Overvoltage Protection (2)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.3.32 LD0.PHPTOV2 Phase overvoltage protection (2) Table 34: LD0.PHPTOV2 Phase overvoltage protection (2) Object type Addr IEC 61850 name SA name Description Values LD0.PHPTOV2 1031 .Str.general START General start 1=Start 1032 .Str.phsA phase A start 1=Start 1033...

  • Page 32: Ld0.Nsptov1 Negative-Sequence Overvoltage Protection (1)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.3.35 LD0.NSPTOV1 Negative-sequence overvoltage protection Table 37: LD0.NSPTOV1 Negative-sequence overvoltage protection (1) Object type Addr IEC 61850 name SA name Description Values LD0.NSPTOV1 .Str.general START General start 1=Start .Op.general OPERATE General operate 1=Operate 2.3.36 LD0.FRPFRQ1 Frequency protection (1)

  • Page 33: Ld0.T1Pttr1 Thermal Overload Protection (1)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.3.38 LD0.T1PTTR1 Thermal overload protection (1) Table 40: LD0.T1PTTR1 Thermal overload protection (1) Object type Addr IEC 61850 name SA name Description Values LD0.T1PTTR1 1200 .Str.general START General start 1=Start 1198 .AlmThm.general ALARM Thermal alarm 1=Alarm...

  • Page 34: Ld0.Trpptrc1 Protection Trip Conditioning (1)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.3.41 LD0.TRPPTRC1 Protection trip conditioning (1) Table 43: LD0.TRPPTRC1 Protection trip conditioning (1) Object type Addr IEC 61850 name SA name Description Values LD0.TRPPTRC1 .Op.general - Op input signal 1=Operate input .Tr.general - Trip output signal 1=Trip output 2.3.42...

  • Page 35: Ld0.Mapgapc4 Multipurpose Protection Signals (4)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.3.46 LD0.MAPGAPC4 Multipurpose protection signals (4) Table 48: LD0.MAPGAPC4 Multipurpose protection signals (4) Object type Addr IEC 61850 name SA name Description Values LD0.MAPGAPC4 1339 .Str.general Start 1=Start 1338 .Op.general Operate 1=Operate 2.3.47 LD0.MAPGAPC5 Multipurpose protection signals (5) Table 49:...

  • Page 36: Ld0.Phqvvr1 Pq - Voltage Variation Signals (1)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.3.51 LD0.PHQVVR1 PQ - Voltage variation signals (1) Table 53: LD0.PHQVVR1 PQ - Voltage variation signals (1) Object type Addr IEC 61850 name SA name Description Values LD0.PH1QVVR1 3092 .VarStrGen.stVal Variation event detected 1=Detected 3088 .VarEnd.stVal...

  • Page 37: Ctrl.essxswi2 Earthing Switch Indication (2)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.3.56 CTRL.ESSXSWI2 Earthing switch indication (2) Table 58: CTRL.ESSXSWI2 Earthing switch indication (2) Object type Addr IEC 61850 name SA name Description Values CTRL.ESSXSWI2 7080 .Pos.stVal POSITION Interm.=0; Off=1; On=2; Bad=3 0...3 2.3.57 LD0.DARREC1 Autorecloser (1) Table 59:...

  • Page 38: Ld0.Sscbr1 Circuit Breaker Condition Monitoring (1)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.3.59 LD0.SSCBR1 Circuit breaker condition monitoring (1) Table 61: LD0.SSCBR1 Circuit breaker condition monitoring (1) Object type Addr IEC 61850 name SA name Description Values LD0.SSCBR1 3067 .APwrAlm.stVal IPOW_ALM lyt alarm 1=Alarm 3068 .APwrLO.stVal IPOW_LO...

  • Page 39: Ld0.Mdsopt1 Generic Operation Time Supervision (1)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.3.63 LD0.MDSOPT1 Generic operation time supervision (1) Table 65: LD0.MDSOPT1 Generic operation time supervision (1) Object type Addr IEC 61850 name SA name Description Values LD0.MDSOPT1 OpTmWrn.stVal WARNING Op. time warning 1=Warning OpTmAlm.stVal ALARM Op.

  • Page 40: Ld0.Vmmxu1 Phase Voltage Limit Supervision (1)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.3.67 LD0.VMMXU1 Phase voltage limit supervision (1) Table 69: LD0.VMMXU1 Phase voltage limit supervision (1) Object type Addr IEC 61850 name SA name Description Values LD0.VMMXU1 4715 .HiAlm.stVal HIGH_ALARM High alarm 1=Alarm 4716 .HiWrn.stVal HIGH_WARN...

  • Page 41: Ld0.Mvgapc2 Multipurpose Binary Inputs (2)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.3.70 LD0.MVGAPC2 Multipurpose binary inputs (2) Table 72: LD0.MVGAPC2 Multipurpose binary inputs (2) Object type Addr IEC 61850 name SA name Description Values LD0.MVGAPC2 .Q1.stVal Input 1 0/1=Off/On .Q2.stVal Input 2 0/1=Off/On .Q3.stVal Input 3 0/1=Off/On...

  • Page 42: Ld0.Spcggio2 Multipurpose Binary Output States (2)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.3.72 LD0.SPCGGIO2 Multipurpose binary output states (2) Table 74: LD0.SPCGGIO2 Multipurpose binary output states (2) Object type Addr IEC 61850 name SA name Description Values LD0.SPCGGIO2 5110 .SPCS01.stVal Output 1 state 0/1=Off/On 5111 .SPCS02.stVal Output 2 state...

  • Page 43: Ld0.Spclggio1 Multipurpose Binary Output States (1)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings Object type Addr IEC 61850 name SA name Description Values 5155 .SPCS14.stVal Output 14 state 0/1=Off/On 5156 .SPCS15.stVal Output 15 state 0/1=Off/On 5157 .SPCS16.stVal Output 16 state 0/1=Off/On 2.3.74 LD0.SPCLGGIO1 Multipurpose binary output states (1) Table 76: LD0.SPCLGGIO1 Multipurpose binary output states (1) Object type...

  • Page 44: Ld0.Xggio110 Physical I/O States

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.3.76 LD0.XGGIO110 Physical I/O states Table 78: LD0.XGGIO110 Physical I/O states Object type Addr IEC 61850 name SA name Description Values LD0.XGGIO110 5020 .Ind1.stVal Input 1 state 0/1=Off/On 5021 .Ind2.stVal Input 2 state 0/1=Off/On 5022 .Ind3.stVal...

  • Page 45: Measurands

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings Object type Addr IEC 61850 name SA name Description Values .Op.phsB - phsB Operate 1=Operate .Op.phsC - phsC Operate 1=Operate .Op.neut - neut Operate 1=Operate Measurands 2.4.1 Supported ASDU types The Object type column contains an internal type identification for the data objects. Internal object types in turn can be configured into different IEC 60870-5-101/104 ASDU data types.

  • Page 46: Ld0.T1Pttr1 Thermal Overload Values (1)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings Object type Addr IEC 61850 name SA name Description Values 10111 .FltNum.stVal Number of DR recordings 0...65535 10112 .MemUsed.stVal DR Rec. memory used 0...100 [%] LD0.LPHD1 10005 .PhyHealth.stVal Device Health 0=OK; 1=Warn; 2=Error 10006 .PhyHealth1.stVal Warning...

  • Page 47: Ld0.Sscbr1 Circuit Breaker Condition Monitoring (1)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.4.6 LD0.SSCBR1 Circuit breaker condition monitoring (1) Table 86: LD0.SSCBR1 Circuit breaker condition monitoring (1) Object type Addr IEC 61850 name SA name Description Values LD0.SSCBR1 10131 .AccAPwrPhA.mag Iyt value, phase A 0...1e6 10132 .AccAPwrPhB.mag...

  • Page 48: Ld0.Csmsqi1 Sequence Of Current Measurements (1)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.4.9 LD0.CSMSQI1 Sequence of current measurements (1) Table 89: LD0.CSMSQI1 Sequence of current measurements (1) Object type Addr IEC 61850 name SA name Description Values LD0.CSMSQI1 8012 .SeqA.c1.instCVal.mag I1_INST - positive magnitude 0...40.00 [xIn] 8013 .SeqA.c2.instCVal.mag...

  • Page 49: Ld0.Vsmsqi1 Sequence Of Voltage Measurements (1)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings Object type Addr IEC 61850 name SA name Description Values 8065 .cVal.phsAB.mag U_INST_AB - phase AB magnitude 0...5.00 [xUn] 8066 .cVal.phsBC.mag U_INST_BC - phase BC magnitude 0...5.00 [xUn] 8067 .cVal.phsCA.mag U_INST_CA - phase CA magnitude 0...5.00 [xUn] 2.4.13 LD0.VSMSQI1 Sequence of voltage measurements (1)

  • Page 50: Ld0.Ledggio1 Led States (1)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.4.17 LD0.LEDGGIO1 LED states (1) Table 97: LD0.LEDGGIO1 LED states (1) Object type Addr IEC 61850 name SA name Description Values LD0.LEDGGIO1 8501 .ISC01.stVal 0=Off; 1=Alarm; 2=Warning 0...2 8502 .ISC02.stVal 0=Off; 1=Alarm; 2=Warning 0...2 8503 .ISC03.stVal...

  • Page 51: Integrated Totals

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings Object type Addr IEC 61850 name SA name Description Values 12037 .VoltsA.mag PhsA voltage 0...5.00 [xUn] 12038 .VoltsB.mag PhsB voltage 0...5.00 [xUn] 12039 .VoltsC.mag PhsC voltage 0...5.00 [xUn] 12040 .VoltsAB.mag PhsAB voltage 0...5.00 [xUn] 12041 .VoltsBC.mag...

  • Page 52: Ctrl.cbcswi1 Operation Counter

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings Table 99: Supported ASDU types in monitoring direction Object Description IEC 60870-5-101/104 ASDU alternatives type Interrogated Change event ASDU Type string ASDU Type string Integrated totals M_IT_NA_1 M_IT_TA_1 M_IT_TB_1 Time Format to be in mode “Short 24 bits” 1) Requires setting parameter Time Format to be in mode “Full 56 bits”...

  • Page 53: General Device Data

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.6.2 General device data Table 103: General device data Object type Addr IEC 61850 name SA name Description Values LD0.LLN0 20000 .LEDRs1.ctlVal LED reset 1 1=Reset 20001 .LEDRs2.ctlVal LED reset 2 1=Reset LD0.LHDP1 20013 .RsDev.ctlVal...

  • Page 54: Ld0.Sscbr1 Circuit Breaker Condition Monitoring (1)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings 2.6.5 LD0.SSCBR1 Circuit breaker condition monitoring (1) Table 106: LD0.SSCBR1 Circuit breaker condition monitoring (1) Object type Addr IEC 61850 name SA name Description Values LD0.SSCBR1 20005 .RsAccAPwr.ctlVal Reset accumulation energy 1=Reset 20006 .RsCBWear.ctlVal Reset CB life...

  • Page 55: Ld0.Spcggio1 Multipurpose Binary Output Controls (1)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings Object type Addr IEC 61850 name SA name Description Values 21167 .Rs3.ctlVal Reset flip-flop 3 1=Reset 21168 .Rs4.ctlVal Reset flip-flop 4 1=Reset 21169 .Rs5.ctlVal Reset flip-flop 5 1=Reset 21170 .Rs6.ctlVal Reset flip-flop 6 1=Reset 21171 .Rs7.ctlVal...

  • Page 56: Ld0.Spcrggio1 Multipurpose Binary Output Controls (1)

    Section 2 1MRS757824 C IEC 60850-5-101/104 data mappings Object type Addr IEC 61850 name SA name Description Values 21142 .SPCS06.ctlVal Output 6 control 0/1=Off/On 21143 .SPCS07.ctlVal Output 7 control 0/1=Off/On 21144 .SPCS08.ctlVal Output 8 control 0/1=Off/On 21145 .SPCS09.ctlVal Output 9 control 0/1=Off/On 21131 .SPCS10.ctlVal...

  • Page 57: Section 3 Iec 60870-5-101/104 Protocol Implementation

    Section 3 1MRS757824 C IEC 60870-5-101/104 protocol implementation Section 3 IEC 60870-5-101/104 protocol implementation Overview This section describes the specific implementation of the IEC 60870-5-101 protocol within RER615. RER615 uses the Triangle MicroWorks, Inc. IEC 60870-5-101 Slave Source Code Library Version 3. This section and the documents listed below provide complete information on how to communicate with a RER615 via the IEC 60870-5-101 protocol.

  • Page 58: System Or Device

    Section 3 1MRS757824 C IEC 60870-5-101/104 protocol implementation Function or ASDU is not used Function or ASDU is used as standardized (default) Function or ASDU is used in reverse mode Function or ASDU is used in standard and reverse mode The possible selection (blank, X, R, or B) is specified for each specific clause or parameter.

  • Page 59: Link Layer

    Section 3 1MRS757824 C IEC 60870-5-101/104 protocol implementation Transmission speed (control direction) Unbalanced Unbalanced Balanced interchange Circuit V. interchange Circuit V. interchange Circuit X. 24/V.28 Standard 24/V.28 24/X.27 Recommended if >1200 bit/s 100 bit/s 2400 bit/s 2400 bit/s 56000 bit/s 200 bit/s 4800 bit/s 4800 bit/s...

  • Page 60: Application Layer

    Section 3 1MRS757824 C IEC 60870-5-101/104 protocol implementation Two octets Structured Unstructured Frame length Maximum length L (control direction) 4095 Maximum length L (monitor direction) Time during which repetitions are permitted (Trp) or number of repetitions When using an unbalanced link layer, the following ASDU types are returned in class 2 messages (low priority) with the indicated causes of transmission: The standard assignment of ASDUs to class 2 messages is used as follows: Type identification...
  • Page 61 Section 3 1MRS757824 C IEC 60870-5-101/104 protocol implementation (System-specific parameter, mark all used configurations with an “X“.) One octet Two octets Information object address (System-specific parameter, mark all used configurations with an “X“.) One octet Structured Two octets Unstructured Three octets Cause of transmission (System-specific parameter, mark all used configurations with an “X“.) One octet...
  • Page 62 Section 3 1MRS757824 C IEC 60870-5-101/104 protocol implementation <11>:= Measured value, scaled value M_ME_NB_1 <12>:= Measured value, scaled value with time tag M_ME_TB_1 <13>:= Measured value, short floating point value M_ME_NC_1 <14> := Measured value, short floating point value with time tag M_ME_TC_1 <15>:= Integrated totals M_IT_NA_1...
  • Page 63 Section 3 1MRS757824 C IEC 60870-5-101/104 protocol implementation <45>:= Single command C_SC_NA_1 <46>:= Double command C_DC_NA_1 <47>:= Regulating step command C_RC_NA_1 <48>:= Set point command, normalized value C_SE_NA_1 <49>:= Set point command, scaled value C_SE_NB_1 <50>:= Set point command, short floating point value C_SE_NC_1 <51>...
  • Page 64 Section 3 1MRS757824 C IEC 60870-5-101/104 protocol implementation <110>:= Parameter of measured value, normalized value P_ME_NA_1 <111>:= Parameter of measured value, scaled value P_ME_NB_1 <112>:= Parameter of measured value, short floating point value P_ME_NC_1 <113>:= Parameter activation P_AC_NA_1 File transfer (Station-specific parameter, mark each Type ID with an “X“...
  • Page 65 Section 3 1MRS757824 C IEC 60870-5-101/104 protocol implementation Type identification Cause of transmission <1> M_SP_NA_1 <2> M_SP_TA_1 <3> M_DP_NA_1 <4> M_DP_TA_1 <5> M_ST_NA_1 <6> M_ST_TA_1 <7> M_BO_NA_1 <8> M_BO_TA_1 <9> M_ME_NA_1 <10> M_ME_TA_1 <11> M_ME_NB_1 <12> M_ME_TB_1 <13> M_ME_NC_1 <14> M_ME_TC_1 <15>...
  • Page 66 Section 3 1MRS757824 C IEC 60870-5-101/104 protocol implementation Type identification Cause of transmission <38> M_EP_TD_1 <39> M_EP_TE_1 <40> M_EP_TF_1 <45> C_SC_NA_1 <46> C_DC_NA_1 <47> C_RC_NA_1 <48> C_SE_NA_1 <49> C_SE_NB_1 <50> C_SE_NC_1 <51> C_BO_NA_1 <70> M_EI_NA_1* <100> C_IC_NA_1 <101> C_CI_NA_1 <102> C_RD_NA_1 <103>...

  • Page 67: Basic Application Functions

    Section 3 1MRS757824 C IEC 60870-5-101/104 protocol implementation Type identification Cause of transmission <125> F_SG_NA_1 <126> F_DR_TA_1* * Blank or X only Basic application functions Station initialization (Station-specific parameter, mark with an “X“ if the function is used.) Remote initialization Cyclic data transmission (Station-specific parameter, mark with an “X“...
  • Page 68 Section 3 1MRS757824 C IEC 60870-5-101/104 protocol implementation Spontaneous transmission (Station-specific parameter, mark with an “X“ if the function is only used in the standard direction, “R“ if only used in the reverse direction, and “B“ if used in both directions.) Spontaneous transmission Double transmission of information objects with cause of transmission...
  • Page 69 Section 3 1MRS757824 C IEC 60870-5-101/104 protocol implementation group 5 group 11 group 6 group 12 Information object addresses assigned to each group must be shown in a separate table. Clock synchronization (Station-specific parameter, mark with an “X“ if the function is only used in the standard direction, “R“...
  • Page 70 Section 3 1MRS757824 C IEC 60870-5-101/104 protocol implementation Mode A: Local freeze with spontaneous transmission Mode B: Local freeze with counter interrogation Mode C: Freeze and transmit by counter-interrogation commands Mode D: Freeze by counter-interrogation command, frozen values reported Counter read Counter freeze without reset Counter reset General request counter...
  • Page 71 Section 3 1MRS757824 C IEC 60870-5-101/104 protocol implementation Test procedure (Station-specific parameter, mark with an “X“ if the function is only used in the standard direction, “R“ if only used in the reverse direction, and “B“ if used in both directions.) Test procedure File transfer...

  • Page 73: Section 4 Glossary

    Section 4 1MRS757824 C Glossary Section 4 Glossary ASDU Application-layer service data unit Cause of transmission Earth fault Electromagnetic compatibility International Electrotechnical Commission IEC 60870-5-101 Companion standard for basic telecontrol tasks IEC 60870-5-104 Network access for IEC 60870-5-101 IEC 60870-5-4 Intelligent electronic device LHMI Local human-machine interface...
  • Page 76 Contact us ABB Oy Medium Voltage Products, Distribution Automation P.O. Box 699 FI-65101 VAASA, Finland Phone +358 10 22 11 +358 10 22 41094 www.abb.com/substationautomation...

Table of Contents