Maintenance; Servicing - Beko Drypoint ACC 4 Instruction/Technical Manual

Section 6: Maintenance

Maintenance

Servicing

Important information.
Ensure shutdown and start-up procedures are followed
prior to carrying out any maintenance work on the
dryer.
The manufacturer will not accept responsibility for
physical injury, damage or delays caused by failure to
observe the instructions in this manual and manuals
provided with your equipment.
Please refer to Section 11-Spares Information.
Service Intervals
Pre Filter Element
Exhaust silencer
Cartridges
Valves
Front Panel Removal
Models 4 SCFM – 35 SCFM
• See figure 6.1.
• Using a hex key remove screw from the front panel.
• Open from bottom, allowing top to drop out releasing the
panel entirely.
Tools required
• 4mm hex key
Heatless Desiccant Dryers |
Annually (6000 hrs)
Annually (6000 hrs)
Every Two Years (12000 Hrs)
Every Four Years (24000 Hrs)
Instruction Manual
Figure 6.1: Models 4 SCFM – 35 SCFM
Figure 6.2: Models 4 SCFM – 35 SCFM with front panel removed
25