Symbols - Beko Drypoint ACC 4 Instruction/Technical Manual

Section 1: Safety
Figure 1.1: Definition of symbols
Risk of Danger
Risk of High Pressure
Equipment Protected by
Double Insulation
Heatless Desiccant Dryers |
Risk of Electric Shock
Warning
Important Note
Instruction Manual
Manual Handling
As with all areas of the workplace, Health and Safety is of
great importance and must be given due care and attention.
While working with this equipment, manual handling
regulations must be considered and adhered to.
Full advice, support and guidance should be detailed in your
Health and Safety Policy and Manual Handling guide, please
take the time to familiarize yourself with these documents.
The Manual Handling Operations Regulations apply to a wide
range of manual handling activities, including lifting, lowering,
pushing, pulling or carrying.
We ask every person handling this product to take the
responsibility for their own Health and Safety and the Health
and Safety of others around them. If you feel there is a
significant risk, you must take steps to either remove the risk
altogether, or reduce the risk prior to carrying out the activity.
If you need further support or guidance with this, please
consult your line manager or the HR Department.
There are safe systems of work and correct procedures in
relation to manual handling, please consult these documents
available within the workplace.
We ask everyone handling this product to:
• Follow appropriate systems of work laid down
for their safety.
• Make proper use of any equipment provided for
their safety.
• Inform the company if they identify hazardous
handling activities.
• Take care to ensure that their activities do not put
others at risk.
If in doubt, please seek further advice and ensure you always
follow the correct procedures and guidance.
For more information please see our Health and Safety
manual attached.
When used in the UK, a 3 amp fuse should be fitted as per the
wiring diagram (figure 4.4).
5