Safety Notes - Epson RC+ 7.0 Manual

2. Safety notes

2. Safety notes
The safety notes shall in any case be read and understood. Their observance secures the
conservation of valuable material and avoids health impairment.
DANGER
DANGER
DANGER
DANGER
WARNING
WARNING
WARNING
WARNING
WARNING
24
Electric danger, eg. at work under voltage
Work at electrical equipment of the machine/equipment may
only be carried out by a qualified electrician or by trained
personnel under direction and supervision of a qualified
electrician according to the electronic regulations.
All safety and danger notes at the machine / equipment must
be observed.
The electrical equipment of a machine / equipment must be
examined regularly. Faults, eg. loose connections or damaged
cables, must be eliminated immediately.
Before opening the device unplug the power plug.
Unplug the main power plug when plugging / unplugging the
cord. Unplug the main power plug when adjustment and
maintenance.
When transporting and shipping, please take actions to
prevent accidents for transporting and shipping.
Build a safety system that shuts off the Hopper power when
the machine or mechanical system protection enclosure is
opened.
Attach protective equipment* to the power supply line to the
hopper controller.
*: fuse, shutting down equipment for wires (MCCB), etc.
When removing hopper from the machine or machine system,
after unplugging the main power plug of the machine or
machine system, and disconnect cable connection between
hopper and hopper controller, remove the hopper.
Carry out inspections and maintenance considering safety.
Part Feeding 7.0 Hopper & Hopper Controller Rev.5