Epson RC+ 7.0 Manual page 4

FOREWORD
Thank you for purchasing our robot system.
This manual contains the information necessary for the correct use of the EPSON RC+
PartFeeding option.
Please carefully read this manual and other related manuals before installing the robot
system.
Keep this manual handy for easy access at all times.
The robot system and its optional parts are shipped to our customers only after being
subjected to the strictest quality controls, tests, and inspections to certify its compliance with
our high performance standards. Please note that the basic performance of the product will
not be exhibited if our robot system is used outside of the usage conditions and product
specifications described in the manuals.
This manual describes possible dangers and consequences that we can foresee. Be sure to
comply with safety precautions on this manual to use our robot system safety and correctly.
TRADEMARKS
Microsoft, Windows, Windows logo, Visual Basic, and Visual C++ are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or other
countries. Other brand and product names are trademarks or registered trademarks of the
respective holders.
TRADEMARK NOTATION IN THIS MANUAL
Microsoft® Windows® 8 Operating system
Microsoft® Windows® 10 Operating system
Throughout this manual, Windows 8 and Windows 10 refer to above respective operating
systems. In some cases, Windows refers generically to Windows 8 and Windows 10.
NOTICE
No part of this manual may be copied or reproduced without authorization.
The contents of this manual are subject to change without notice.
Please notify us if you should find any errors in this manual or if you have any comments
regarding its contents.
MANUFACTURER
CONTACT INFORMATION
Contact information is described in "SUPPLIERS" in the first pages of the following
manual:
Robot System Safety Manual Read this manual first
ii Part Feeding 7.0 Hopper & Hopper Controller Rev.5