Lenovo ThinkSystem D2 Manual page 51

Enclosure, modular enclosure, modular enclosure for 6u configuration and thinksystem sd530 compute node messages and codes reference
Hide thumbs Also See for ThinkSystem D2:
Table of Contents

Advertisement

Table 2. Events organized by severity (continued)
Message String
Event ID
FQXSPPP4040I
The server was powered off via Platform Event Filter.
FQXSPPP4041I
The server was powered off via Real Time Clock (scheduled power
off).
FQXSPPP4042I
Management Controller [arg1] reset was initiated due to Power-On-
Reset.
FQXSPPP4043I
Management Controller [arg1] reset was initiated by PRESET.
FQXSPPP4044I
Management Controller [arg1] reset was initiated by CMM.
FQXSPPP4045I
Management Controller [arg1] reset was initiated by XCC firmware.
FQXSPPP4046I
Remote power permission is [arg1].
FQXSPPP4047I
Management Controller [arg1] reset was initiated by user [arg2].
FQXSPPP4048I
Attempting to AC power cycle server [arg1] by user [arg2].
FQXSPPP4049I
Management Controller [arg1] reset was initiated by Front Panel.
FQXSPPR0000I
[ManagedElementName] detected as present.
FQXSPPR2001I
[ManagedElementName] detected as absent.
FQXSPPU2001I
An Over-Temperature Condition has been removed on
[ProcessorElementName].
FQXSPPU2002I
The Processor [ProcessorElementName] is no longer operating in a
Degraded State.
FQXSPPW0001I
[PowerSupplyElementName] has been added to container
[PhysicalPackageElementName].
FQXSPPW0005I
[PowerSupplyElementName] is operating in an Input State that is out
of range.
FQXSPPW0008I
[SensorElementName] has been turned off.
FQXSPPW0009I
[PowerSupplyElementName] has been Power Cycled.
FQXSPPW2001I
[PowerSupplyElementName] has been removed from container
[PhysicalPackageElementName].
FQXSPPW2002I
[PowerSupplyElementName] has returned to OK status.
FQXSPPW2003I
Failure no longer predicted on [PowerSupplyElementName].
FQXSPPW2005I
[PowerSupplyElementName] has returned to a Normal Input State.
FQXSPPW2006I
[PowerSupplyElementName] has returned to a Normal Input State.
FQXSPPW2007I
[PowerSupplyElementName] Configuration is OK.
FQXSPPW2008I
[PowerSupplyElementName] has been turned on.
FQXSPPW2031I
Numeric sensor [NumericSensorElementName] going low (lower non-
critical) has deasserted.
FQXSPPW2035I
Numeric sensor [NumericSensorElementName] going low (lower
critical) has deasserted.
FQXSPPW2047I
Numeric sensor [NumericSensorElementName] going high (upper
critical) has deasserted.
Severity
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
.
Chapter 3
XClarity Controller events
47

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7x207x217x22

Table of Contents