Lenovo ThinkSystem D2 Manual page 78

• FQXSPEM4033I: Acoustic Mode [arg1] has been disengaged to allow adequate cooling.
This message is for the use case where Acoustic Mode is disengaged.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0275
User Action:
Information only; no action is required
• FQXSPFC4000I: The bare metal connection process has been started.
Bare Metal Connection process has been started
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0143
User Action:
Information only; no action is required
• FQXSPFC4001I: The bare metal update application reports a status of [arg1].
Bare Metal Update Application Status
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0144
User Action:
Information only; no action is required
• FQXSPFC4002I: System running in setup.
System running in setup
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0193
User Action:
Information only; no action is required
• FQXSPFC4003I: UEFI deployment boot mode is enabled for NextBoot.
UEFI deployment boot mode is enabled for NextBoot
74
ThinkSystem D2 Enclosure, Modular Enclosure, Modular Enclosure for 6U Configuration and ThinkSystem SD530 Compute Node
Messages and Codes Reference