List Of Xclarity Controller Events - Lenovo ThinkSystem D2 Manual

Enclosure, modular enclosure, modular enclosure for 6u configuration and thinksystem sd530 compute node messages and codes reference
Hide thumbs Also See for ThinkSystem D2:
Table of Contents

Advertisement

Table 2. Events organized by severity (continued)
Message String
Event ID
FQXSPPW0047M
Numeric sensor [NumericSensorElementName] going high (upper
critical) has asserted.
FQXSPPW0061M
Sensor [SensorElementName] has transitioned to critical from a less
severe state.
FQXSPPW0063M
Sensor [SensorElementName] has transitioned to critical from a less
severe state.
FQXSPSD0001L
The [StorageVolumeElementName] has a fault.
FQXSPSD0005L
Array [ComputerSystemElementName] is in critical condition.
FQXSPSD0006L
Array [ComputerSystemElementName] has failed.
FQXSPSE4000I
Certificate Authority [arg1] has detected a [arg2] Certificate Error.
FQXSPUN0019M
Sensor [SensorElementName] has transitioned to critical from a less
severe state.
FQXSPUN0020N
Sensor [SensorElementName] has transitioned to non-recoverable
from a less severe state.
FQXSPUN0023N
Sensor [SensorElementName] has transitioned to non-recoverable.
FQXSPUN0047N
Sensor [SensorElementName] has transitioned to non-recoverable.
FQXSPUP0007L
Invalid or Unsupported firmware or software was detected on system
[ComputerSystemElementName].
FQXSPUP4000I
Please ensure that the Management Controller [arg1] is flashed with
the correct firmware. The Management Controller is unable to match
its firmware to the server.
FQXSPUP4003I
[arg1] firmware mismatch internal to system [arg2]. Please attempt to
flash the [arg3] firmware.
FQXSPUP4004I
XCC firmware mismatch between nodes/servers [arg1] and [arg2].
Please attempt to flash the XCC firmware to the same level on all
nodes/servers.
FQXSPUP4005I
FPGA firmware mismatch between nodes/servers [arg1] and [arg2].
Please attempt to flash the FPGA firmware to the same level on all
nodes/servers.

List of XClarity Controller events

This section lists all messages that can be sent from the XClarity Controller.
• FQXSPBR4000I: Management Controller [arg1]: Configuration restored from a file by user [arg2].
This message is for the use case where a user restores a Management Controller configuration from a file.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0027
User Action:
54
ThinkSystem D2 Enclosure, Modular Enclosure, Modular Enclosure for 6U Configuration and ThinkSystem SD530 Compute Node
Messages and Codes Reference
Severity
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7x207x217x22

Table of Contents