Table of Contents
Advertisement
Figure 1
1. Carriage bolt (1/4 x 2
inches)
2. Machine frame
3. Spacer
4.
Locate the slope sensor connector in the main
wire harness and plug it into the slope sensor.
5.
Use cable ties to secure the wire harness away
from moving parts or pinch points.
6.
Install the slope-sensor decal adjacent to the
machine-stability decal on the storage-pod lid
(Figure
2).
g338090
4. Slope snsor
5. Lock nut (1/4 inch)
1. Machine-stability decal
3
Figure 2
2. Slope-sensor decal
g308336
Advertisement
Table of Contents
