Regulatory Options; Band Selection - Motorola VC70N0 Product Reference Manual

4 - 34 VC70 Vehicle Computer Product Reference Guide
Table 4-24 OP Mode Filtering Options
Field
AP Networks
AD-Hoc Networks
Tap to save the settings or tap
Save

Regulatory Options

Use the
Regulatory
(within a country) a vehicle computer is only allowed to use certain channels.
Regulatory Options Dialog Box
Figure 4-47
Table 4-25 Regulatory Options
Field
Settings
Enable 802.11d

Band Selection

The
Band Selection
802.11 standard networks.
Select the
AP Networks
strength within the
4-4). These are the APs available to the vehicle computer profile for association. If
this option was previously disabled, refresh the
display the AP networks available to the vehicle computer.
Select the
Ad-Hoc Networks
and their signal strength within the
networks available to the vehicle computer profile for association. If this option was
previously disabled, refresh the
Hoc networks available to the vehicle computer.
to discard any changes.
X
settings to configure the country the vehicle computer is in. Due to regulatory requirements
Select the country from the drop-down list. To connect to a profile, the profile country must
match this setting, or the AP country setting if you selected the
The WLAN adapter attempts to retrieve the country from APs. Profiles which use
mode can only connect if the country set is the same as the AP country
Infrastructure
settings or if the profile country setting is
transmit the country information.
settings identify the frequency bands to scan when finding WLANs. These values refer to the
Description
check box to display available AP networks and their signal
(see
Available WLAN Networks
check box to display available peer (adapter) networks
Available WLAN Networks
Available WLAN Networks
Description
Allow Any Country
Find WLANs Application on page
window to
Available WLAN Networks
. These are peer
window to display the Ad
check box.
Enable 802.11d
. All APs must be configured to