Connecting A Bluetooth Scanner (Ds3578) Directly To The Vc70 (Scan Profile) - Motorola VC70N0 Product Reference Manual

2 - 36 VC70 Vehicle Computer Product Reference Guide
Cradle Host Bar Code
Figure 2-63
Scan Write to Custom Defaults barcode.
5.
Custom Default Bar Code
Figure 2-64
Scan the PAIR label barcode on the cradle.
6.
Verify that the scanner is connected properly. See
7.
To unpair the scanner from the cradle, scan the Unpairing barcode.
8.
Unpairing Bar Code
Figure 2-65

Connecting a Bluetooth Scanner (DS3578) Directly to the VC70 (Scan Profile)

NOTE Refer to the scanner Product Reference Guide for information on configuring the scanner.
To connect a Bluetooth scanner to the VC70:
Ensure that the scanner battery is fully changed.
1.
Scan the
2. Set All Defaults
Set All Defaults Bar Code
Figure 2-66
NOTE The above allows the scanner to reset from any previous configuration to the default configuration.
Scan a Cradle Host barcode to configure the scanner to Bluetooth SCAN API mode before the pairing.
3.
Verifying the Scanner is Working Properly on page
bar code.
2-42.