Sharp ER-A440 Service Manual page 62

[JOB#2614]
LOGO TEXT PROGRAMMING
2614
X
Position code
X: 1 ∼ 6
Character can be entered by using character keys or numeric keys.
The key entry sequence for entering one character by numeric keys
is as follows:
XXX → 00 Key
Please refer to section 4.
(ER-A450)
MRS=
NOTE: This programming is related to JOB# 912D programming.
The programable line has below relations with each key word
at JOB# 912D.
"6-line header":
"3-line header":
"3-line footer":
"Graphical LOGO only": No line is programmable.
[JOB#2615]
Programming of the No. of times of validation printing and feed line
after printing Differ ST.
0
2615 AB
A (For ER-A440): No. of times of validation printing = 0 to 9
A (For ER-A450): Not used (Fixed at "0")
B: Feed line after despression of differ subtotal key = 0 to 9
MRS = 10 (For ER-A440)
00 (For ER-A450)
All space
Character key ST TL
1 (24 char.)
2 (24 char.)
3 (24 char.)
4 (24 char.)
5 (24 char.)
6 (24 char.)
XXX: Character code (3 digits)
(ER-A440)
All 6 lines are programmable.
Upper 3 lines (1st-3rd line) are pro-
grammable.
Lower 3 lines (4th-6th line) are pro-
grammable.
TL
[JOB#2616]
OPTIONAL FEATURE
2616
X: 1
A: OP X/Z report
Enable
Disable
B: PO operation in REG mode
Enable
Disable
C: Not used (Fixed at "0")
D: "RFND" key entry in REG mode
Enable
Disable
E: Direct void function in REG mode
Enable
Disable
F: Indirect void in REG mode
Enable
Disable
G: Subtotal void in REG mode
Enable
Disable
H (For ER-A440):
Refund VP
Non compulsory
Compulsory
H (For ER-A450): Not used (Fixed at "0")
X: 2
A: The first last item void
Enable
Disable
B, C: Not used (Fixed at "00")
D: Printing of the number of purchases
No
Yes
E: Time print
Yes
No
F: Printing of journal
Full print
Journal select
G (For ER-A440):
Item VP
Enable
Disable
2 – 16
No change
XX
ABCDEFGH ST
MRS = 00000000
A
0
1
B
0
1
D
0
1
E
0
1
F
0
1
G
0
1
H
0
1
MRS = 00000000
A
0
1
D
0
1
E
0
1
F
0
1
G
0
1
TL