Silvercrest SPBH 3000 B2 Operating Instructions Manual page 15

CAUTION
► Use only a USB mains adapter with an output
voltage of 5 V and an output current of at least
2 .1 A to charge the power bank .
► Use only the supplied charger cable
charge the power bank!
► Always disconnect the charger cable
charging is complete!
♦ Connect the USB plug of the charger cable
a suitable a USB mains adapter (not supplied) .
♦ Connect the microUSB plug of the charging cable
to the microUSB charging port
Power Bank . An estimate of the charge level is
shown by means of the charge level LEDs
LED display
One LED is flashing
One LED is on,
the second LED is flashing
Two LEDs are on,
the third LED is flashing
Three LEDs are on,
the fourth LED is flashing
All LEDs are on
■ 12 │ GB │ IE │ NI
to
when
on the
Charge level
< 25 %
25 - 49 %
50 - 74 %
75 - 97 %
98 - 100 %
SPBH 3000 B2
to
.