Siemens SIMOTICS GP Operating Instructions Manual page 67

5. - Take care when removing the package because the packaging
could have staples, nails and screws with sharp parts that could physically
hurt the installer.
6. - For the disposal of packaging materials, the laws of your area
should be consulted regarding the separation of materials and their final
disposal.
7. - Check the free movement or rotation of the arrows before
energizing the motor.
WARNING
Explosion hazard when making modifications to the
machine
Substantial modifications to the motor are not permitted – or may only be
performed by the manufacturer. Otherwise an explosion can occur in an
explosive atmosphere. This can result in death, serious injury or material
damage.
Please contact the SIEMENS Service Center, if necessary.
Note
:
The increased level of danger in hazardous areas demands that you
pay particular attention to the notes marked with:
Motor for installation.
Only use explosion-protected motors in appropriate areas in
accordance with directive applied in this location. If the certification is
supplemented by an X, please note the special conditions in the IECEx type
test certificate, special conditions for explosion-proof motors.
Indication for repairing the paint on explosion-proof
motors.
In the repair of paint damage in explosion-proof motors, the following
warnings must be observed.
Unrestricted 67 A5E43486667A_AB