Spare Parts; Final Disposal - Siemens SIMOTICS GP Operating Instructions Manual

eyebolt which will be placed in the hole of the eye using a nut on the
opposite side of the eye bolt and fixed.
2.2.- Lightly tighten the lifting system and proceed with the extraction of
the rest of the screws with the housing and slowly move the shield outwards
until it is completely removed. (Be careful not to hit the shaft in the
.
extraction)

Spare parts

For ordering parts:
1. - For orders of spare parts or parts for repair, the following information is
needed:
● Name of the piece
● Motor reference and serial number, (It is indicated on the name
plate of the motor).
2. - Contact any of our distributors in Mexico, USA and Canada, they are
authorized and trained to process your requirement of the parts that need
your motor.
3. - Additionally, you can also contact our customer service and support in
replacement parts and / or spare parts.
support.mexico.automation@siemens.com
4. - For clients outside Mexico, please contact with International support
and advisory personnel at the following address:
https://www.siemens.com/global/en/home.html

Final Disposal

Introduction:
Protecting the environment and preserving its resources are
corporate goals of the highest priority for us. Our worldwide environmental
management system to ISO 14001 ensures compliance with legislation and
sets high standards in this regard. Environmentally friendly design, technical
safety and health protection are always firm goals even at the product
development stage.
Recommendations for the environmentally friendly disposal of the
machine and its components are given in the following section. Be sure to
comply with local disposal regulations.
Unrestricted
11
12
95 A5E43486667A_AB