Using The Mixing Tools - Silvercrest SKMP 1300 C1 Operating Instructions Manual

__288190_Kuechenmaschine_Profi_B6.book Seite 10 Montag, 7. August 2017 11:09 11
7. Using the mixing
tools
Lifting up the drive arm
1. Turn the unlocking lever 10 to point up-
wards (in the direction of the arrow)
and lift up the drive arm 22 until it
clicks into place and the unlocking le-
ver 10 snaps back into its locked posi-
tion.
Inserting the mixing bowl
2. Place the mixing bowl 15 into the base
unit 19 in such a way that the metal
pins on the lower edge fit into the re-
cesses in the base unit.
3. Lock the mixing bowl 15 by rotating it
clockwise slightly, until it is firmly in
place.
Mounting the splash guard
CAUTION:
Never use the mixing bowl 15 without
the splash guard attached 21. The ma-
terial you are mixing could otherwise
be ejected.
4. Place the splash guard 21 onto the
drive arm 22 from below. The filling
10 GB
opening with flap 20 should point in
the direction of the speed control 11.
5. Rotate the splash guard 21 in the direc-
tion of the closed lock symbol until it
clicks into place.
Inserting the mixing tool
6. Select the appropriate mixing tool:
- Dough hook 14: for heavy doughs,
e.g. bread dough
- Whisk 16: for whipping cream, egg
white etc.
- Beater 17: for light dough or batter,
e.g. cake mix or pancake batter.
For further information: see "Overview
of functions" on page 9.
7. Place the mixing tool onto the axle 23
from below.
Ensure that the small metal pins on the
axle 23 slot into the recesses in the mix-
ing tool.
8. Figure A: press the mixing tool up-
wards slightly and rotate it anticlock-
wise until it stops.