Cleaning The Appliance; Cleaning The Mixing Bowl With Lid, Continuous Shredder, Lid With Pusher, Blender Lid And All Accessories; Cleaning The Blender; Storage - Silvercrest SKM 550 B2 Operating Instructions Manual

Cleaning the appliance

■ Wipe the appliance with a damp cloth. For stub-
born soiling use a mild detergent on the cloth.
Wipe off any detergent residue using a cloth
moistened with clean water. Then carefully dry
the appliance.
Cleaning the mixing bowl with lid,
continuous shredder, lid with pusher,
blender lid and all accessories
■ Clean all accessories, the mixing bowl with its
lid 6, the blender lid 4 and measuring jug, the
protective cover for the drive hub, the continu-
ous shredder 7 and its lid with the pusher w
as well as the shredding disc 8, grating disc
9 and the rotary cutting disc q in warm water
with a little detergent. Any residues can be re-
moved with a washing-up brush. Rinse all parts
with warm clean water and make sure that all
parts are dry before re-using them.
NOTE
The accessories, the mixing bowl with
its lid 6, the blender lid 4 and meas-
uring jug, the protective cover for the
drive hub, the continuous shredder 7
and its lid with the pusher w as well as
the shredding disc 8, grating disc 9
and the rotary cutting disc q are also
suitable for cleaning in the dishwasher.
► If you clean them in the dishwasher, please
ensure that no plastic parts become trapped
under pressure between other objects. This
may cause them to become deformed.
► Wherever possible, place all plastic parts in
the top basket of the dishwasher.
SKM 550 B2

Cleaning the blender

WARNING! RISK OF INJURY!
► Do not handle the blender knife with your
bare hands.
ATTENTION! DAMAGE TO PROPERTY!
The blender 4 is not suitable for cleaning in
►
a dishwasher. Cleaning it in a dishwasher will
cause irreparable damage to the blender 4.
Clean the blender 4 in warm water with a little
■
mild detergent. Afterwards, rinse all parts with
clean water so that no detergent residues remain.
In most cases, you an also achieve sufficiently hygienic
cleaning directly after use in the following way:
1) Put some water containing a little detergent
into the fully assembled blender 4.
2) Place the lid onto the measuring jug slightly
offset and then turn it until the lid clicks into
place (Image I).
3) Switch on the blender 4 for a few seconds.
4) Pour out the washing water. Any residues can
be removed with a washing-up brush.
5) Afterwards, rinse out the blender 4 with
plenty of clean water, so that all detergent
residues are removed.

Storage

■ Place the mains cable in the cable storage com-
partment i when storing the appliance.
■ Store the cleaned appliance in a clean, dust-free
and dry location.
GB │ IE │ 29 ■