Cleaning And Care - Silvercrest SKM 550 B2 Operating Instructions Manual

Multi-functional

Table of Contents

Available languages

2) Remove the protective cover for the blender

drive hub (turn so that the marking "

the protective cover for the blender drive hub is

in line with the marking " " on the appliance

itself) (Image F).

3) Position the blender 4 on top of the appliance

(so that the marking "

lines up with the marking " " on the appli-

ance).

Turn the blender anti-clockwise until the stop

(so that the marking "

lines up with the marking " " on the appli-

ance itself) (Image G).

4) Add the ingredients.

–

Maximum ﬁll quantity: approx. 1 litre;

–

Foaming liquids, maximum 0.5 litre;

–

Ideal processing quantity for solids: 50 - 100 g.

NOTE

►

Take note of the table in the section

"Recommended ﬁlling quantities".

5) Place the lid onto the measuring jug slightly

oﬀset and then turn it until the lid clicks into

place (Image I).

6) Turn the rotary switch r to the required setting.

Adding more ingredients

1) Switch the appliance oﬀ using the rotary switch r.

2) Rotate the lid of the blender 4 a little (Image I),

remove the lid and add the ingredients you

want to mix

3) Rotate the measuring jug, which is placed in

the lid of the blender 4, by 90° and remove it.

Then gradually add the solid ingredients

using the opening provided for this purpose.

■

│

GB │ IE

" on

" on the blender 4

After you have ﬁnished

using your appliance

1) Switch the appliance oﬀ using the rotary

switch r.

2) Turn the blender 4 clockwise and remove it.

NOTE

Ideally, you should clean the blender 4 im-

►

mediately after use (see the section "Cleaning

and care"). This makes food residues easier

to remove.