Setting tools in the ribbon
Item
1
Apply to laser marking
system
2
System information
3
Marking field
calibration
Control tools in the ribbon
Item
1
Connection
2
Operation
3
Laser pumping
4
"Stop laser" button
18
1
Description
Updates the system settings in the laser marking system. If any changes are made, "!"
symbol is appeared on the icon.
Displays information about the laser marking system, such as version or serial number.
You can adjust the marking field position when it is misaligned. It is available for LP-RF
and LP-RV.
1
2
Description
Use this tool to establish or disconnect an online connection between the laser marking
system and a PC.
Use this tool to switch the laser marking system operation to remote or RUN mode.
Turns laser pumping on or off.
Terminates the laser radiation or disable the laser radiation temporarily.
ME-NAVIS2-QR-1
2
3
3
4