Terminate The Operation - Panasonic NAVI smart Quick Reference

2-9 Terminate the operation

1.
To turn laser pumping off, select the "Laser pumping" tool in the
ribbon.
2.
Select "Online" in the ribbon. Alternatively, go to the "Startup" screen and select "Online".
The "Connection" dialog appears.
3.
Select "Disconnect".
The online connection with the laser marking system is now disconnected.
• Do not turn off the power supply during an online connection with your PC. Otherwise a data loss or system failure may
occur.
4.
Go to the "Startup" screen and select "Exit" from the menu.
Alternatively, select "X" in the upper right corner of the screen.
5.
Turn off the power of the laser marking system and remove the key from the controller.
The laser safety officer must keep the key.
36
Laser pumping on
ME-NAVIS2-QR-1
"Laser pumping" tool
Laser pumping off
"Online" tool
OFF
ON