Connect Your Pc And The Laser Marking System - Panasonic NAVI smart Quick Reference

2-4 Connect your PC and the laser marking system

1.
Connect the USB cable to the USB interface B on the
controller.
• Do not disconnect the USB cable while the laser marking
system is online.
• Before you can make an Ethernet connection, you must make the appropriate communication settings in Laser Marker
NAVI smart. Connect the PC via USB to make these settings.
• If the laser marking system supports Bluetooth, before you can make a Bluetooth connection, you must make the
appropriate communication settings in Laser Marker NAVI smart. Connect the PC via USB to make these settings.
PC
ME-NAVIS2-QR-1
Controller
27