Table of Contents
Advertisement
6
Select, by pressing the function buttons B
Subsequently select, by pressing the function button D
play
the Menu is once again shown. To return to the start screen: select, by
q
pressing the function button A
8.9 Switching audio signals on/off
This voice recorder is equipped with two types of audio signals:
Ack. beep (e.g. after switch-on of the voice recorder, as soon as the start screen
Ú
is shown.)
Audio warning (e. g. discharged batteries/cells)
Ú
From the factory all audio signals are switched on. However, you can separate both
warning and ack. beep tones from each other manually, for switch-on and switch-
off purposes. To do this:
1
Switch the voice recorder on by pressing the button »ON/OFF«
As soon as the start screen is shown in the display
2
Place the multi-function slider
3
Then select, by pressing the function button D
indicated:
42
Manual
after 10 min
after 30 min
OK
w
h
resp. C
e
twice in succession, »ESC«.
q
at »
STOP«.
, »Menu«. In the display
e
ESC
, your preferred setting.
r
, »OK«; In the dis-
t
.
a
:
is
q
Advertisement
Table of Contents
