Table of Contents
Advertisement
6
Select, by pressing the function button B
to be switched on/off. »Auto off« stands for Ack. beep, »Battery low« for audio
warnings. Subsequently select, by pressing the function button D
In the display
7
To switch off the signal tone type selected in step 6: Select, by pressing the
function button B
To switch the signal tone type selected in step 6 back on: Select, by pressing the
function button B
8
Select, by pressing the function button D
lection of the type of audio signal is now shown again. To return to the start
screen: select, by pressing the function button A
»ESC«.
8.10 Adjusting the illumination
The background illumination of the display can be adjusted so that ...
it switches on with every press of a button and, after about ten seconds, auto-
Ú
matically switches itself back off (Setting »auto«)
remains permanently switched off (Setting »Off«)
Ú
From the factory, the setting is »auto«. To change the setting:
1
Switch the voice recorder on by pressing the button »ON/OFF«
the start screen is shown in the display
2
Place the multi-function slider
3
Then select, by pressing the function button D
indicated:
44
is indicated:
q
Signal on
Signal off
OK
or C
, »Signal off«.
e
r
or C
, »Signal on«.
e
r
or C
e
, »OK«. In the display
t
:
q
at »
STOP«.
h
t
, the type of audio signal
r
ESC
three times in succession,
w
a
, »Menu«. In the display
, »OK«.
t
the se-
q
. As soon as
is
q
Advertisement
Table of Contents
