Table of Contents
Advertisement
Projecting Computer Screen from Projector
When the connection is established, the launcher appears. If you click the [Live] button, the computer screen is
projected from the projector. See "Explanation of Launcher Screen" (page 6).
Notes
• The launcher is minimized to the taskbar after live mode starts.
• If the computer's OS is Windows 8.1 or Windows 10, or if Windows Aero is set to be used in the display settings
of Windows 7, the launcher will be displayed on the projector screen. If Windows Aero is not set to be used in
the display settings of Windows 7, the launcher will not be displayed on the projector screen.
• Audio is not sent to the projector, so audio is not output from the projector's internal speakers or audio device
connected to the projector .
• Some video parts may not be played depending on the video playback application.
• Refreshing of the projection screen is suspended while the computer is in a locked state when, for example, the
screensaver is running.
• Projection is not possible while the projector is in the standby state. Make sure to turn on the projector.
• Since a computer running Windows 7, Windows 8 .1 or Windows 10 recognizes the Easy Wireless Stick as a CD
drive, it can be removed without performing the procedure that USB flash memory or a USB wireless adapter
require. The stick can be removed when the software finishes processing.
• If the computer switches to hibernation or sleep mode, the software ends automatically. If this happens, discon-
nect the Easy Wireless Stick and then reconnect it and start the procedure again from the beginning.
• If the Easy Wireless Stick is disconnected during image projection, the software is force ended and the com-
puter screen will remain displayed on the projector's projection screen. If you do not want the screen to remain
displayed, click the [Stop] button to stop projection and then disconnect the Easy Wireless Stick.
Downloaded from
ManualsNet.com
search engine
– 13 –
Advertisement
Table of Contents
