Connecting Using The Registered Projector Tree - Panasonic Easy Wireless Stick Operation Manual

■ Connecting using the registered projector tree

To connect using the registered projector tree, use the following procedure. Register the tree (group, projector) in
Easy Wireless Stick beforehand. (See page 16)
1 . Connect Easy Wireless Stick .
When you connect Easy Wireless Stick to a USB port of the computer, the software starts automatically. Select
the [Tree] tab in the "Select Access Port" screen.
Notes
• If the software does not start automatically, manually run the [EWSGUIMain.exe] file in the [EasyWS] CD drive
of My Computer or Computer .
• If the AutoPlay screen appears, select [Run EWSGUIMain.exe].
If you also add a check to [Always do this for software and games], the software will start automatically from the
next time .
• The software will not start automatically while the Login screen is displayed or the computer is in a locked state .
2 . Connect to the projector .
Select a projector displayed in the registered projector tree, and click [Connect] button.
Example: If the name of the connection destination projector is "Name1244", select the projector indicated as
"Name1244", and then click [Connect] button.
Notes
• The background color changes when a projector is selected. You can also connect by double-clicking the icon
for the projector in the registered projector tree screen .
• If the corresponding projector could not be found using the registered wireless LAN connection setting, use an-
other wireless LAN connection setting to search for the corresponding projector.
• If the projector you want to connect to is not displayed below the group it belongs to, click [+].
3 . Project the screen of the computer. (See page 13)
Downloaded from ManualsNet.com search engine
– 11 –