Connecting Using Automatic Connection - Panasonic Easy Wireless Stick Operation Manual

■ Connecting using automatic connection

If you connect once, you can store the information for connecting to Easy Wireless Stick .
Add a check to [Automatic Connection Setting] in the launcher to enable automatic connection to the projector and
starting of projection .
1 . Connect Easy Wireless Stick .
When you connect Easy Wireless Stick to a USB port of the computer, the software starts automatically and the
projector for which you set the automatic connection setting is connected to automatically .
Notes
• If the software does not start automatically, manually run the [EWSGUIMain.exe] file in the [EasyWS] CD drive
of My Computer or Computer .
• If the AutoPlay screen appears, select [Run EWSGUIMain.exe].
If you also add a check to [Always do this for software and games], the software will start automatically from the
next time .
• The software will not start automatically while the Login screen is displayed or the computer is in a locked state .
• To cancel the automatic connection setting, clear the check from the check box.
• Connection may not be possible if the projector's wireless LAN connection setting is changed after selecting the
[Automatic Connection Setting].
If [Failed to connect.] is displayed, connect using the search list again. (See page 9)
• While the projector is connected and not performing projection (Live/Pause), you can set the automatic connec-
tion setting in the launcher screen .
Downloaded from ManualsNet.com search engine
– 12 –