Removing The Secondary 2.5-Inch Hard Drive Assembly - Dell OptiPlex 7000 Tower Service Manual

Steps
1. Disconnect the hard drive data and power cables from the connectors on the 2.5-inch hard drive module.
2. Press the release tabs on both the sides of the hard drive bracket to release it from the slots on the computer chassis.
3. Lift the hard drive assembly from the computer.
NOTE: Note the orientation of the hard drive so that you can replace it correctly.

Removing the secondary 2.5-inch hard drive assembly

Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
About this task
The following images indicate the location of the 2.5-inch hard drive and provide a visual representation of the removal
procedure.
18 Removing and installing components