Installing The 3.5-Inch Hard Drive Assembly - Dell OptiPlex 7000 Tower Service Manual

Steps
1. Align the tabs on the bracket with the slots on the hard drive and place the hard drive into the hard drive bracket.
2. Snap the hard drive into the hard drive bracket.
Next steps
1. Install the 3.5-inch hard drive
2. Install the side cover.
3. Follow the procedure in

Installing the 3.5-inch hard drive assembly

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the 3.5-inch hard drive assembly and provides a visual representation of the
installation procedure.
26 Removing and installing components
assembly.
after working inside your computer.