Steps
1. Remove the liner behind the VR heatsink module.
2. Align and adhere the VR heatsink on the system board.
3. Tighten the two captive screws that secure the VR heatsink to the system board.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
Power button
Removing the power button
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
About this task
The following images indicate the location of the power button and provide a visual representation of the removal procedure.
72
Removing and installing components
after working inside your
before working inside your
computer.
computer.