Silvercrest SKE 3.6 A1 Operating Instructions Manual page 54

Operation
GB
IE
52
1) Take the foil cutter
station 8.
2) To cut open the foil seal over the cork: Place the foil cutter
1 on the closed bottle of wine. Press it fi rmly together with your thumb and forefi n-
ger. Firmly take hold of the bottle with one hand so that it cannot fall over.
Fig. 1
3) Turn the bottle of wine through 360 degrees. You may have to repeat this sev-
eral times before you can remove the capsule of the fi lm collar.
4) Replace the foil cutter
5) Firmly take hold of the bottle with one hand so that it cannot fall over. Place
the corkscrew on the wine bottle cork. Press it fi rmly until the spiral penetrates
perceptibly into the cork.
6) Press and hold the lower button
spiral is screwed into the cork and then pulls it out of the bottle neck. Continue
to keep the wine bottle and the corkscrew gripped fi rmly while doing this.
7) First release the lower button
moved from the bottle neck.
WARNING - RISK OF INJURY
Ensure that no liquids can permeate into the corkscrew/the charger 8 when it
is in use. Otherwise, there is the risk of receiving an electric shock!
7 from its storage compartment 9 under the charging
7 back into its storage compartment 9.
▼ 2. The LEDs „In Operation" 3 glow. The
▼ 2 when the cork has been completely re-
7 as shown in Fig.
Electric Corkscrew