Wlan Card; Removing The Wlan Card - Dell OptiPlex XE4 Tower Service Manual

Steps
1. Align the notch on the solid-state drive with the tab on the solid-state drive connector.
2. Insert the solid-state drive at a 45-degree angle into the connector on the system board.
3. Replace the screw (M2x3.5) to secure the M.2 2280 solid-state drive to the connector on the system board.
NOTE: Repeat the above procedure for installing the other solid-state drive.
Next steps
1. Install the side cover.
2. Follow the procedure in

WLAN card

Removing the WLAN card

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
About this task
The following images indicate the location of the wireless card and provide a visual representation of the removal procedure.
after working inside your
before working inside your
computer.
computer.
Removing and installing components 31