Sd Card Reader (Optional); Removing The Sd Card Reader - Dell OptiPlex XE4 Tower Service Manual

Steps
1. Insert the intrusion switch into its slot and slide the switch to secure it into the slot.
2. Connect the intruder cable to the connector on the system board.
Next steps
1. Install the side cover.
2. Follow the procedure in

SD card reader (optional)

Removing the SD card reader

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
About this task
The following image indicates the location of the SD card reader and provides a visual representation of the removal procedure.
76 Removing and installing components
after working inside your
before working inside your
computer.
computer.