Panasonic AG-CX10 Operating Instructions Manual page 152

5
Protection status of the clip
This is displayed when the clip is protected.
6
Standard time code/clip name
The first 8 digits for the time code when starting shooting of a clip or the file name of the clip are displayed in alphanumeric.
The information to display is set in the [THUMBNAIL] menu → [DISPLAY] → [DATA].
7
Delete selection status
8
Clip that cannot be played back
This is displayed when the clip cannot be played back with the unit because the system frequency is different, etc.
9
Copy selection status
This is displayed when the clip is selected.
10
Re-connect selection status
This is displayed when clips to be re-connected are selected.
11
*
Defective clip /unknown clip
: This is displayed for a defective P2 clip that may be repaired.
: This is displayed for a defective P2 clip that cannot be repaired.
: This is displayed for a P2 clip with a different format for P2 standard.
12
*
Incomplete clip
: This is displayed for a P2 clip when the clip is recorded over multiple memory cards, and any of those memory cards are not inserted.
Display of clip information
Displays the information of the clip where the cursor is positioned.
1
Move the yellow cursor to the clip to display the clip information.
2
Select the [THUMBNAIL] menu → [CLIP] → [INFORMATION].
The clip information is displayed.
∫ Clip information
*1 Displayed when using
CX10
1
Clip that cannot be played back
This is displayed when the clip cannot be played back with the unit because the system frequency is different, etc.
2
Thumbnail number
3
Protect status of the clip/defective clip/unknown clip/incomplete clip
: This is displayed when the clip is protected.
*1
:This is displayed for a defective P2 clip that may be repaired.
*1
:This is displayed for a defective P2 clip that cannot be repaired.
*1
:This is displayed for a P2 clip with a different format for P2 standard.
*1
:This is displayed for a P2 clip when the clip is recorded over multiple memory cards, and any of those memory cards are not inserted.
4
Thumbnail image
5
Clip name
6
[START TC]
Displays the time code value at the start of the recording.
7
[START UB]
Displays the user bits value at the start of the recording.
8
[DATE]
Displays the date of the recording.
9
[TIME]
Displays the time at the start of recording.
Chapter 6 Playback — Thumbnail operation
*
*
1 2 3
4 5
.
- 152 -
6
7
8
9
10
11
12
13
14