Connecting To The Network - Panasonic AG-CX10 Operating Instructions Manual

Connecting to the network

(For the / )
CX7 CX8
This unit is equipped with wireless LAN. It can connect to wireless LAN devices via a network.
(For the )
CX10
This unit is equipped with wireless LAN. It can connect to networks via wireless LAN or wired LAN.
To use a wired LAN, use the supplied USB HOST conversion cable and USB ethernet adaptor to connect a LAN cable.
Use the following cable for connections:
*
j LAN cable (STP , category 5 or better, maximum 100 m (approx. 328 feet))
* STP (Shielded Twisted Pair)
≥ Do not use any other USB HOST conversion cables except the supplied one.
≥ Do not use any other USB ethernet adaptors except the supplied one.
Available functions
When the unit is connected to a network, the following functions are available.
∫ Connecting to HC ROP app
You can remotely control this unit with the HC ROP app by connecting this unit with an iPhone/iPad or Android terminal via wireless LAN.
≥ Checking camera status
≥ Camera remote control (focus, zoom, image quality settings, recording control such as start/end recording, and time code/user bits settings)
≥ Menu Operations
≥ Starting and stopping streaming (when the function is assigned to the USER button)
The unit supports the multi camera function, with which a camera selected from up to 8 cameras is remotely controlled from a single device.
For details about operation of the HC ROP app, refer to the online help for the app.
∫ Streaming function
You can perform streaming of audio and video currently shot with the unit over a network (wired LAN
* Available for use when using
CX10
∫ (For the )
CX10
NDI|HX function
This unit can be connected to a network via a NewTek NDI|HX compatible switcher and a wired LAN.
Chapter 1 Overview — What you can do with this unit
.
*
/wireless LAN).
- 18 -